Scout Bot

The Scout Bot's internal battery is charged with a standard micro-USB cable (included with your purchase).  Get a replacement cable here.

To charge:

  1. Connect the micro-USB cable to a USB outlet and then into the back of the Scout Bot.
  2. The power button will be Red while charging when the Scout Bot app is not connected.
  3. The power button will be Red & Blue while charging when the Scout Bot app is connected.
  4. The power button will blink Red when it has low battery or is not charged.
  5. The power button will have no light when fully charged and off. 

The internal battery should last up to 5 hrs. depending on how much panning you are doing.  You can charge the battery while using the Scout Bot, which is recommended if you plan on filming for more than 5 hrs. at a time.

Scout Remote

The Scout Remote has 2, 3V lithium cell batteries in it.  The battery life depends on usage.  If your remote starts to take several presses to pan or save a highlight, you should replace the batteries.  We recommend always carrying 2 spare batteries to ensure you don't miss any action.  Any battery with the Code CR1632 will work, you can purchase more here.